LIVANS · 40 products
LIVANS MOLLE Pouches and Gear Organizers
Empty first aid carriers, dump and admin pouches, duty belt holders and range cases sized for belts, vests and packs.
Where to start in the catalogue
LIVANS Quick-Release Handle MOLLE IFAK Pouch
Empty MOLLE first aid pouch with a pull-open grab handle.
Check price on AmazonLIVANS Khaki Drawstring Large Dump Pouch
Large khaki drawstring dump pouch for a rig or a wide belt.
Check price on AmazonLIVANS 12-Position Rotating Flashlight and Handcuff Pouch Set
Rotating flashlight holder paired with a stacked double handcuff case.
Check price on AmazonLIVANS Dual Padded Square Pistol Range Case
Slim padded pistol case with a zippered compartment for range trips.
Check price on AmazonLIVANS IFAK and Medical Pouches
Nine carriers for a first aid kit assembled by the owner: rip-away bags, pull-out inserts, a micro IFAK pouch and tourniquet sleeves. The rip-away, quick-release, ultra-light and micro pouches ship empty, so size and mounting decide the pick. Compared with the utility line, these are marked for first aid with red fabric or pull tabs, cross patches and elastic loops sized for shears and tourniquets.
LIVANS Red 1000D Rip-Away IFAK Pouch
Empty tri-fold first aid bag that rips away from its MOLLE platform.
- 7.1"L x 3.5"W x 8"H
- 1000D nylon, double stitching
- Tri-fold design with elastic loops, mesh compartments
- Two-way zippers
- Rip-away back panel with wide handle
- Buckle strap for car headrest
LIVANS Micro IFAK Pouch with Tourniquet Hammock
Compact pull-out first aid insert pouch with a tourniquet hammock for belt carry.
- Size: 4.9 x 4.9 x 3.3 inches
- 500D Cordura nylon
- Front loop surface 4.9 x 2.4 inches
- Elastic bands and loops inside
- Insert with pull tabs and hook tab
- Split tourniquet hammock usable separately
LIVANS Rip-Away Ultra-Light MOLLE IFAK Pouch
Lightweight rip-away first aid pouch that detaches from its MOLLE base with a buckle.
- Weighs 6.4 oz (182 g)
- Compact 8 x 2 x 4.7 in
- 500D nylon with water-resistant coating
- Quick-release rip-away buckle
- Dual-slider zippers, fully opening
- Red cross patch and internal elastic loops
LIVANS Elastic Tourniquet Holder TQ Sleeve
Wide elastic sleeve that holds a tourniquet and marker horizontally on a belt or vest.
- Wide elastic band with marker pen sleeve
- Fits C-A-T and other common tourniquets
- 6-inch self-wrap hook-n-loop strap
- Strap adjustment range 1.5 to 2 in
- Horizontal mounting on belts, vests or packs
- Dual-open design for one-handed drawing
All IFAK pouches 9 items
Utility, Dump and Admin Pouches
Drawstring dump pouches collect spent magazines and loose items at the range, while zippered admin and EDC pouches keep small tools sorted. Three hook-backed panels skip MOLLE entirely and press onto the loop surface inside a pack. This is the line for general storage; the medical line is the one laid out for first aid supplies.
LIVANS Molle Drawstring Dump Pouch
Belt-mounted drawstring pouch for collecting magazines and loose range gear.
- 600D nylon construction
- Main compartment with drawstring closure
- Holds 6 AR or AK 30-round magazines
- Front hook & loop pocket, side mesh pockets
- Two rear MOLLE straps and front D-ring
- Color: Black
LIVANS 1000D Molle EDC Admin Pouch
Compact admin pouch opening fully flat for organized everyday carry essentials.
- 7"H x 4.3"L x 3"W externally
- 1000D nylon shell with PVC lining
- Double full-length metal zippers
- Front compartments 3.9" x 1.9" and 3.9" x 3.1"
- Two MOLLE back straps and rear D-ring
- Not fire-resistant; hand wash only
LIVANS 7.5-Inch Hook Back Admin Panel
Rigid elastic-webbing panel for pens, flashlights and gadgets inside any loop-lined bag.
- Size: 7.5"L x 5"H
- Cordura 1000D Nylon
- Hard internal PE board backing
- Elastic webbing in various sizes
- See-through mesh slip pocket
- Full hook fastener backing
LIVANS Khaki Ammo Utility Pouch with ID Patch
Compact zippered utility pouch for sorting ammo, tools and small EDC gear.
- Measures 7 x 3.5 x 4 inches
- 600D nylon fabric, 3.5 oz
- Two-way dual zipper
- Dual carry handles and D-ring buckle
- Writable hook-and-loop ID patch panel
- Khaki, 2 per pack
All utility pouches 9 items
LIVANS Duty Belt Holders for Cuffs, Lights and OC Spray
Seven belt-mounted holders in polymer and nylon: handcuff cases, a rotating flashlight holster, an MK-4 OC canister holder and combo sets that add a baton or light to a double handcuff pouch. Most clip onto belts up to 2 inches wide. They suit security and law enforcement duty belts, where the other lines are built mainly around MOLLE webbing.
LIVANS Double Handcuff Pouch for Duty Belt
Stacked duty belt case that carries two sets of handcuffs in one pouch.
- 3"L x 2.6"W x 3.9"H, 0.29 lbs
- Holds two pairs of handcuffs
- Fits chained, hinged and folding rigid cuffs
- MOLLE/PALS back strap, belts up to 2"
- Bungee retention cord
- Reinforced bottom
LIVANS MK4 OC Spray Duty Belt Holder
Open-top polymer holster keeping an MK-4 OC canister on a duty belt.
- Fits MK-4 canisters 1.4"-1.5" diameter
- Belt widths 1.25"/1.5"/1.75"/2"/2.25"
- 360-degree rotating belt clip
- 2 height positions
- Injection-molded polymer
- Color: Black
LIVANS Double Handcuff Pouch and Expandable Baton Holster
Baton holster for 21-26 inch batons paired with a stacked double handcuff case.
- Fits 21-26 inch telescopic batons
- Baton tube diameter 1.2-1.38 in
- Belt clip for belts 1.2-2.5 in wide
- Clip rotates 360° and locks in 16 positions
- Two mounting heights for the rotator section
- Double handcuff case holds two sets stacked
LIVANS Rotating Clip Polymer Handcuff Case
Polymer handcuff holder with a rotating clip for duty belts and MOLLE vests.
- Polymer construction
- 360° rotating rear belt clip
- Fits belts 1.5 to 2 inches wide
- Fits most chain and hinged handcuffs
- Matte black brass retention buckle
- Tactical handcuff strap included
All duty belt holders 7 items
Pistol Cases and Range Day Gear
Two padded soft pistol cases, a folding 89-inch prone shooting mat, a mat-and-sleeve bundle and an arm-worn map case with rewritable windows. This line covers getting equipment to the range and laying it out there, as opposed to the belt pouches that carry it during the session.
LIVANS Dual Padded Square Pistol Range Case
Slim padded handgun case with a zippered compartment and elastic bands for range trips.
- Size: 10.6 x 2 x 8.7 inches
- Zippered compartment 10.4 x 7.9 inches
- 5 elastic bands for magazines and flashlights
- 500D nylon with reinforced stitching
- Two rubber top handles and double zippers
- Front loop surface for patches
LIVANS Khaki Padded Double Pistol Case
Foam-padded soft case for storing and transporting handguns and magazines.
- 14" x 8" size
- High-density foam padding
- Six elastic keepers for mags
- 500D nylon, water-resistant
- Includes U.S.A flag patch
- Color: Khaki
LIVANS 89-Inch Padded Prone Shooting Mat
Extra-long folding shooting mat with padded elbow and knee zones for prone practice.
- Length 89.4 in, width 28 in
- 0.4-inch EPE padding at elbows and knees
- 1000D nylon with water-resistant coated base
- Folds to 14 x 9.5 x 5 in
- Weight 955 g
- Front bipod webbing stopper
LIVANS Coyote Brown Map Case Wrist Pouch
Arm-worn map and data card sleeve with rewritable windows and a zipped pocket.
- 1 large and 2 small PVC windows
- Map window 6.5 x 5.5 inches
- Card window 4.3 x 3.1 inches
- Two adjustable wristbands
- 600D nylon with double stitching
- Metal-zipper front pocket and loop panel
All range gear 5 items
LIVANS Patches, Visor Panels and Pack Add-Ons
Cross and morale patches with hook backing, two sun visor organizers for the car, a 3L hydration carrier, glove straps, T-Mount snap clips and honeycomb shoulder pads. None of these is a pouch in the usual sense. They label, hang or carry things around the pouches in the other lines.
LIVANS Semi-Rigid MOLLE Car Sun Visor Organizer
Semi-rigid MOLLE visor panel that organizes registration papers, sunglasses and tools in a vehicle.
- 12.8 x 6.9 x 1.4 inches
- Dual PE boards and 1000D polyester
- 3 hook-and-loop straps, extendable to 8.27 in
- Zippered compartment, mesh card pockets, pen loops
- 3 rows of elastic webbing
- Loop patch panel with flag patch included
LIVANS Khaki 3L Molle Hydration Carrier
MOLLE-mounted pouch carrying a water bladder on vests, packs and plate carriers.
- Fits water bladders up to 3L
- 3 hidden water pipe outlets
- 600D nylon, waterproof inner surface
- 6mm closed cell foam back panel
- Bottom drain hole
- Bladder not included
LIVANS Reflective Medic Cross Patch 2-Pack
Reflective white cross patches that mark medical gear in daylight and at night.
- 3M micro-prismatic retroreflective sheeting
- 2"L x 2"W (5 x 5 cm)
- 2 pcs per package
- Laser cut on 500D nylon
- High-density Hook-N-Loop backing
- Color: white
LIVANS T-Mount MOLLE Gear Clip with Snap Hook
MOLLE-mounted snap hook clip for hanging keys, gloves or a flashlight from a belt or vest.
- 25mm T-Mount with clasp hook
- Nylon webbing 1 x 3 inches
- Holds up to 50 kg
- Zinc alloy hook with spray coating
- 600D nylon webbing, polymer T-Mount
- Black, 2 per pack
All accessories 10 items
What sets LIVANS tactical gear apart
Empty interiors laid out for a self-built kit
The IFAK carriers arrive without contents. Inside, the layout is elastic retention loops, slip pockets and mesh compartments, and the quick-release handle pouch alone carries 18 loops and three slip pockets. Sort your supplies first, then pick the pouch whose interior matches them.
Rip-away mounts that leave the base behind
Several pouches separate from their MOLLE base in one pull. The ultra-light IFAK releases with a quick-release buckle, while the red 1000D bag and the mesh utility pouch use a hook-and-loop back panel with a handle or D-rings. The base stays on the vest or pack and the bag comes away for quick access.
Rotating clips with fixed lock positions
The belt clip on the flashlight holders turns a full 360 degrees and lock in 12 positions. On the baton holster the clip locks in 16 positions and the rotator section mounts at two heights, and the OC canister holder also offers two height positions. A light or baton can sit angled forward or straight down rather than wherever the belt leaves it.
Hook-backed panels that need no webbing
Three organizers carry a full hook fastener backing in place of MOLLE straps. The admin panel and the mesh zipper insert add a hard PE board, so they stay flat once pressed onto a loop surface. Check that a bag has a loop-lined interior before ordering one; without it they have nothing to grip.
Nylon grades, linings and care
Most of the catalogue is nylon fabric in three weights. 1000D nylon covers the EDC admin pouch, the PVC-lined tool pouch, the hook-back admin panel, the shoulder pads and the prone mat. 600D nylon goes into the small drawstring dump pouch, the mesh rip-away pouch, the map case and the hydration carrier, and 500D nylon into both pistol cases, the quick-release IFAK and the large khaki dump pouch. The micro IFAK uses 500D Cordura.
A few items add a second layer. The admin and EDC tool pouches have a PVC lining, the hydration carrier pairs a waterproof inner surface with a 6mm closed cell foam back panel, and the khaki pistol case is padded with high-density foam. The OC canister holder and the rotating-clip handcuff case are polymer rather than fabric, and the two red first aid bags differ: one is 1000D nylon, the other 1000D polyester.
Care is simple. The admin pouch and the PVC-lined tool pouch are hand wash and air dry only, and the admin pouch is not fire-resistant, so keep it away from open flame and hot exhaust. On the large dump pouch and the hydration carrier, the bottom drain holes let rinse water run out after a muddy hike.
| 1000D nylon | EDC admin pouch, EDC tool pouch, admin panel, shoulder pads, shooting mat, red rip-away IFAK |
|---|---|
| 1000D polyester | Red first aid bag, semi-rigid visor organizer |
| 600D nylon | Small dump pouch, mesh rip-away pouch, ammo utility pouch, map case, hydration carrier, glove straps |
| 500D nylon | Pistol cases, quick-release and ultra-light IFAK pouches, large dump pouch, tourniquet and shears pouch |
| 500D Cordura nylon | Micro IFAK pouch with tourniquet hammock |
| Hypalon composite and 500D nylon | Camogreen IFAK roll pouch |
| Polymer | MK-4 OC holder, rotating clip handcuff case |
| Linings and padding | PVC lining on admin and tool pouches; high-density foam in the khaki pistol case; 0.4-inch EPE on the mat |
| Care | Hand wash and air dry for the admin and EDC tool pouches |
Measure your belt before choosing a holder
Belt widths, tube diameters and outer dimensions for every holder and carrier sit on each product card.
Compare sizesWho carries these pouches, and where
A first aid bag on the car headrest
The red 1000D polyester bag mounts to a vehicle headrest or to MOLLE gear, and at 9.5 by 7.1 by 3.1 inches it is the larger of the two red bags. Tri-fold mesh pockets sort the contents. A flag and a cross patch come with it, so passengers can tell at a glance which bag holds the bandages.
Range sessions with frequent reloads
Shooters who change magazines often hang the black drawstring pouch on the belt and drop empties into it instead of onto the ground. It takes six AR or AK 30-round magazines. Side mesh pockets and a front hook-and-loop pocket keep smaller items apart from the magazines.
Security shifts on a 2-inch belt
Officers and guards who carry two pairs of cuffs can stack both in one 3 by 2.6 inch case instead of wearing two. A bungee retention cord keeps them seated, the bottom is reinforced, and the back strap fits belts up to 2 inches or MOLLE/PALS webbing on a vest.
Long days on the trail with water on the back
Hikers and hunters mount the khaki carrier on a chest rig, plate carrier or pack and slide in a bladder of up to 3L. The tube exits through one of three hidden outlets. If your bladder is larger than 3L it will not fit, and the box contains the carrier only.
About this catalogue
This catalogue gathers the LIVANS line into five groups: medical and IFAK pouches, utility and dump pouches, duty belt holders, pistol cases and range gear, and a set of patches, visor organizers and pack accessories. Forty items are listed, and several come in more than one color or pack size.
Nearly every piece attaches to something else: MOLLE webbing, a duty belt, a vehicle headrest or sun visor, or the loop-lined wall of a bag. The common thread is organization. Pouches arrive empty, holders are sized to a particular canister, light or cuff, and patches mark which bag holds what.
The range suits hikers and campers building their own kit, drivers who keep supplies in the car, people heading to the range, and security or law enforcement staff fitting out a duty belt. Colors run mostly to black and khaki, with red for first aid bags, CamoGreen for two IFAK carriers, gray for one visor organizer and coyote brown for the map case.
LIVANS fit and care questions
Do the IFAK pouches come with first aid supplies?
Which belt widths do the duty belt holders fit?
Which flashlights fit the rotating holster?
What do the hook-backed insert panels need to stay in place?
How should the nylon pouches be cleaned?
Which handguns fit the padded pistol cases?
Comparing LIVANS pouches side by side
Mounting, material and what each piece is sized to hold, across the main lines of the catalogue.
| LIVANS | Mounting | Material | Sized for | Check price on Amazon |
|---|---|---|---|---|
| LIVANS quick-release IFAK pouch | 4 MOLLE clips or belt | 500D nylon | Empty; 18 loops, 3 slip pockets | Check price on Amazon |
| Micro IFAK pouch by LIVANS | Belt or plate carrier | 500D Cordura nylon | Empty; 4.9 x 4.9 x 3.3 in | Check price on Amazon |
| LIVANS large khaki dump pouch | 2 MOLLE straps; belts up to 4.3 in | 500D nylon, stretch sides | Loose and oversized gear | Check price on Amazon |
| LIVANS 1000D EDC admin pouch | 2 MOLLE straps, rear D-ring | 1000D nylon, PVC lining | EDC items; 7 x 4.3 x 3 in | Check price on Amazon |
| Polymer handcuff case from LIVANS | Rotating clip, belts 1.5-2 in | Polymer | Most chain and hinged cuffs | Check price on Amazon |
| LIVANS padded square pistol case | Top handles; slides into a backpack | 500D nylon | 10.4 x 7.9 in compartment | Check price on Amazon |
| LIVANS 3L hydration carrier | MOLLE on vests, packs, plate carriers | 600D nylon, foam back panel | Bladder up to 3L, not included | Check price on Amazon |
Organize your gear, pouch by pouch
LIVANS MOLLE pouches, IFAK pouches, dump and utility pouches, duty belt holders, rifle cases and range gear. Check size, mounting and today’s price on Amazon.